(800) 471-1157
|
(800) 471-1157 |
|
Perimeter Personnel & Debris Netting
|
Part Number: 00335 14" Beam Clamp with Dual Adjustability (fits 3 1/2" to 14" beam with 1-1/4" flange) 00220 24" Beam Clamp (fits 18" - 24" beam with 2-3/4" Flange Thickness) Sliding Beam Clamp: Designed to slide easily with the worker along the top or bottom flange of an I-Beam. Key Benefits
Vertical Beam Clamp Part Number: 00227
The Vertical Beam Clamp is a fall arrest anchorage device for use on "I" or "H" Beams during steel erection and building construction. The Beam Clamp will provide a fixed anchorage point for one (1) person when used as per manufacturer's recommendations and specifications. The Beam Clamp is sized to fit a 4 1/2" to 12" wide beam with a 1" thick flange. Key Benefits
Maximum Capacity: 1 person Maximum Weight: 310 pounds
Chain Vertical Beam Clamp Part Number: P-00226
Safe Approach's chain vertical beam clamp is a fall arrest anchorage device for vertical "I" or "H" beams. The clamps provide a fixed anchorage point for one or two people depending on the model. Custom sizes are available on request. Key Benefits
Maximum Capacity: 1 person Maximum Weight: 310 pounds
Model M Beam Clamp Part Number: 00016 The Beam Clamp - Model M is an anchorage device to be used for fall arrest on "I" and "H" beams during steel erection and building construction. The Beam Clamp will provide a fixed anchorage point for one (1) person when used as per manufacturer's recommendations and specifications. The Beam Clamp is sized to fit 4-1/2" to 12" wide beams with a 1" thick flange. The unit can also be used as a horizontal lifeline with cable grab or rope grab systems.
The above picture shows a rope type horizontal lifeline with a maximum capacity of one person. If a cable system (Part#P-00147) is used in lieu of rope as shown above, this system is rated for two persons. Key Benefits
Pricing:
|
|
Phone: (800) 471-1157 (207) 345-9900 Fax: (207) 345-9100
Send mail to
sales@safeapproach.com with
questions or comments about this web site.
|
Part
Number: 00219 14" Beam Clamp (fits 3-1/2 to 14"
beam with 1-1/4" flange) 
